6GK6000-8FX03-2AA0 RUGGEDCOM MEDIA MODULE FX03
From SIEMENS
| Product type designation | RUGGEDCOM Media Module FX03 | |
| RUGGEDCOM MEDIA MODULE 2x 100FX - Multi mode ports, 1300nm, MTRJ connectors Equivalent to FX03 | ||
| Suitability for operation | RSG2xxx | |
| Interfaces | ||
| Number of electrical/optical connections / for network components or terminal equipment / maximum | 2 | |
| Number of optical interfaces / for network components or terminal equipment / maximum | 2 | |
| Design of the optical interface / for network components or terminal equipment | MT RJ | |
| Range / at the optical interface / depending on the optical fiber used | 2 km | |
| Permitted ambient conditions | ||
| Ambient temperature | ||
| during operation | -40 ... +85 °C | |
| during storage | -40 ... +85 °C | |
| during transport | -40 ... +85 °C | |
| Note | A maximum ambient operating temperature of +85 °C is permissible for a duration of 16 hours | |
| Relative humidity / at 25 °C / without condensation / during operation / maximum | 95 % | |
| Protection class IP | IP40 (when installed) | |
| Design, dimensions and weight | ||
| Design | Media module | |
| Product feature / conformal coating | No | |
| Mounting type | screwed | |
| Installation in media module slot | Yes | |
| Standards, specifications, approvals | ||
| Standard | ||
| for EMC | FCC Part 15 (Class A), EN55022 (CISPR22 Class A) | |
| for safety / from CSA and UL | UL 60950-1, CSA C22.2 No. 60950-7 | |
| for hazardous zone / from CSA and UL | Hazardous Locations: Class 1 Division 2 | |
| for emitted interference | EN 61000-6-4 (Class A) | |
| for interference immunity | EN 61000-6-2 | |
| Laser protection class | Complies with 21 CFR chapter 1, subchapter J | |
| Certificate of suitability | EN 61000-6-2, EN 61000-6-10 | |
| CE marking | Yes | |
| C-Tick | No | |
| KC approval | No | |
| E1 approval | No | |
| IEC 61850-3 | Yes | |
